ABM Drag Bar Booster Streetbike Handlebar

ABM Drag Bar Booster Streetbike Handlebar

SKU: TJ68412
GTIN: 4054783634231
Category: Lenker Sondermaß
Manufacturers: ABM

ABM Alu handlebar Drag Bar Booster Streetbike, type 0440, black, 28,6 mm with conical taper to 22mm to the grips.

89,95 €

incl. 19% VAT , (DHL-Kostenpflichtig)

Currently out of stock

Motorcycle handlebar dragbar booster 0440

- Surface glass bead blasted with laser engraving ABM incl. scaling
- Made of high-strength aluminium
- Clamping range Ø28,6 mm
- With conical taper to 22mm to the grips
- Tested - according to latest requirements
- With ABE

Consider!

The mounting of the handlebar is only possible on motorcycles that have corresponding risers with a handlebar clamp of Ø28.6 mm.

- All cables and Bowden cables must be routed so that they are free of kinks and stresses during all steering and deflection movements, and there must be sufficient clearance to prevent chafing.
- The brake hoses must not fall below a bending radius of 40 mm. At full steering angle, with the engine running, to either side, the engine speed must not change.
- Care must be taken to ensure that all controls located on the handlebars are in the correct position for their function, even when the handlebars are fully turned. The hand brake cylinder or the reservoirs must be in the correct working position.
- Attention must be paid to the free movement of the handlebar, its attachments and sufficient steering angle to each side. The handlebar must move easily from steering stop to steering stop.
- After assembly, perform a functional check of the brake, clutch, throttle, lights and horn.
- Check the approval of the handlebar for your motorcycle using the current ABE (see certificate)! The registration for not listed models is possible after consultation with the TÜV/DEKRA test center according to §19.2 is possible in many cases.

There are no reviews yet.

Contact data

E-Mail